Skip to product information
Avocado Mosfet Speed Controller with Durable Wiring for Efficient Power Management
  • Avocado Mosfet Speed Controller with Durable Wiring for Efficient Power Management
  • AVOCADO avocado mosfet with clear casing for improved electrical efficiency in electronic setups
AVOCADO MOSFET BURST PROGRAMMABLE BURST AIRSOFT AEG VER III

AVOCADO MOSFET BURST PROGRAMMABLE BURST AIRSOFT AEG VER III

1 left
$30.00 CAD

✅ Fast & Tracked Shipping / Free over 250$+ (prov. rates)
✅ 30-day return policy for peace of mind
✅ Secure checkout with encrypted payment
  • American Express
  • Mastercard
  • Visa

Product Description

AVOCADO MOSFET BURST PROGRAMMABLE BURST AIRSOFT AEG VER III

This avocado mosfet adds advanced electronic control to your airsoft aeg, providing programmable burst fire, improved trigger response, and essential battery protection.

Features

  • User-friendly online programming - the user can program the aeg at any time simply by using the trigger.
  • Programmable burst shot count from 2 to 12 rounds.
  • Programmable continuous firing mode up to 30 shots.
  • Equipped with low battery protection.
  • Equipped with the latest power mosfet technology.
  • Active braking technology utilized.
  • Audible beeps are available to confirm programming and indicate low battery status.
  • Automatic battery status setting to adapt to different battery types.
  • Add the "burst" function to virtually any airsoft aeg in seconds! the burst avocado gives you reduced gearbox wear, better trigger control, and tactical advantages! the burst avocado is version 2 of the burst wizard we previously offered, featuring easier adjustment, mosfet technology, and real-time burst firing!
  • The "burst avocado" is equipped with a low battery detector. two pre-installed thresholds (6.3 v and 9.3 v) allow for use with a wide range of battery voltages. the device detects the initial voltage when the battery is plugged in and determines which threshold to use. when the battery drops below the preset threshold, the device emits an audible signal and stops firing during the trigger pull. this is especially useful for lipo batteries, as they should not be fully discharged.
  • Manufacturer: avocado airsoft usa.

Specifications

  • Connector type: standard deans.
  • Size: 45 mm x 17 mm x 8 mm.
  • Operating voltage: 7.2 to 12 v.
  • Maximum continuous current: 65 a.
  • Recommended operating battery type: li-po 2 to 3 cell (7.4 to 12 v).
  • Programmable "burst" mode: 1 to 12 shots.
  • Programmable "continuous" mode: 30 shots.
  • Low battery detection: 6.6 to 9.9 v.
  • If your aeg's rate of fire exceeds 25, there will be a +1 shot inaccuracy. for example, setting 2 trigger pulls for a 3-round burst, etc.
  • Use only the following battery types with the burst wizard:
  • nimh: 7.2 v (6 cell), 8.4 v (7 cell), 10.8 v (9 cell), 12 v (10 cell).
  • lipo: 7.4 v (2 cell), 11.1 v (3 cell).
  • do not use nimh 9.6 v (8 cell) with this mosfet unit.
SHIPPING & RETURNS

District Airsoft ships everywhere in Canada (no international shipping) with an estimated processing time of 1–3 days.

  • Estimated Delivery Time: 3–9 days, depending on the province.
  • Shipping Fees: Fees are fixed per province.
  • Free Shipping: Available for orders of $250 or more (region-dependent).
  • Carriers Used: Purolator, UPS, FedEx, Canpar and many more !
  • Tracking: Tracking information is provided via email.
  • Important Notes:Please verify your address carefully.Report any package damage within 48 hours of receipt.DistrictAirsoft is not responsible for delays caused by weather, carriers, or peak periods.

For more information: Shipping Policy.
Notice an Issue With This Product?

If you notice any issue with this product on our website such as missing information, incorrect specifications, unclear translation, or low-quality photos, please let us know.

We manage a large catalog and sometimes a product page can slip through with an error. Your feedback helps us correct it quickly and keep the site accurate.

Contact Us

Out of stock or want to pre-order?

Use the Back in Stock Alert / Pre-Order button located below the Buy button.

By clicking it, you’ll automatically receive an email notification when this item is back in stock.

We’ll also contact you directly to confirm whether you’d like to pre-order this product as part of our next order.

Our suggestions